Midnight Mansion Forums | |
http://www.actionsoft.com/forums/cgi-bin/yabb2/YaBB.pl
General Custom Mansions Area (Mac and Windows) >> Custom Mansions / Designing >> Moving sprites http://www.actionsoft.com/forums/cgi-bin/yabb2/YaBB.pl?num=1189271120 Message started by brell on 09.09.2007 at 01:14:19 |
Title: Moving sprites Post by brell on 09.09.2007 at 01:14:19
Is it possible to move sprites from one place to another within a room in the editor?
|
Title: Re: Moving sprites Post by Nick12 on 09.09.2007 at 02:48:43
Sorry brell, I don't think it's possible I have tried many times and it never works.
|
Title: Re: Moving sprites Post by Psychotronic on 09.09.2007 at 03:13:31
You can select sprites with the selection box just like you can with tiles, and then move them. It's sometimes hard to tell exactly how large a sprite is, though. You often have to select a much bigger area around the sprite than you'd think. Switches are wider and taller than they look, apparently. And then you have to be careful that you don't mess up your tiles. I usually switch to layer 5 when I move sprites around, and hope that I don't have to fix any ladders.
Is that helpful? I'm not quite sure I'm answering the right question. |
Title: Re: Moving sprites Post by brell on 09.09.2007 at 03:14:57
Yes, it works, thanks a lot!
|
Title: Re: Moving sprites Post by Freddy on 10.09.2007 at 00:48:42
Since my own mansions are allergic for backgrounds ;D, I can often do it in layer zero.
|
Midnight Mansion Forums » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |